# dns server name, defaut is host name
# server-name,
# example:
# server-name smartdns
#
# Include another configuration options
# conf-file [file]
# conf-file blacklist-ip.conf
# dns server bind ip and port, default dns server port is 53, support binding multi ip and port
# bind udp server
# bind [IP]:[port] [-group [group]] [-no-rule-addr] [-no-rule-nameserver] [-no-rule-ipset] [-no-speed-check] [-no-cache] [-no-rule-soa] [-no-dualstack-selection]
# bind tcp server
# bind-tcp [IP]:[port] [-group [group]] [-no-rule-addr] [-no-rule-nameserver] [-no-rule-ipset] [-no-speed-check] [-no-cache] [-no-rule-soa] [-no-dualstack-selection]
# option:
# -group: set domain request to use the appropriate server group.
# -no-rule-addr: skip address rule.
# -no-rule-nameserver: skip nameserver rule.
# -no-rule-ipset: skip ipset rule.
# -no-speed-check: do not check speed.
# -no-cache: skip cache.
# -no-rule-soa: Skip address SOA(#) rules.
# -no-dualstack-selection: Disable dualstack ip selection.
# example:
# IPV4:
# bind :53
# bind :6053 -group office -no-speed-check
# IPV6:
# bind [::]:53
# bind-tcp [::]:53
bind :53
# tcp connection idle timeout
# tcp-idle-time [second]
# dns cache size
# cache-size [number]
# 0: for no cache
cache-size 1024
# prefetch domain
# prefetch-domain [yes|no]
# prefetch-domain yes
# List of hosts that supply bogus NX domain results
# bogus-nxdomain [ip/subnet]
# List of IPs that will be filtered when nameserver is configured -blacklist-ip parameter
# blacklist-ip [ip/subnet]
blacklist-ip 4.36.66.178
blacklist-ip 8.7.198.45
blacklist-ip 37.61.54.158
blacklist-ip 46.82.174.68
blacklist-ip 59.24.3.173
blacklist-ip 64.33.88.161
blacklist-ip 64.33.99.47
blacklist-ip 64.66.163.251
blacklist-ip 65.104.202.252
blacklist-ip 65.160.219.113
blacklist-ip 66.45.252.237
blacklist-ip 72.14.205.99
blacklist-ip 72.14.205.104
blacklist-ip 78.16.49.15
blacklist-ip 93.46.8.89
blacklist-ip 128.121.126.139
blacklist-ip 159.106.121.75
blacklist-ip 169.132.13.103
blacklist-ip 192.67.198.6
blacklist-ip 202.106.1.2
blacklist-ip 202.181.7.85
blacklist-ip 203.98.7.65
blacklist-ip 203.161.230.171
blacklist-ip 207.12.88.98
blacklist-ip 208.56.31.43
blacklist-ip 209.36.73.33
blacklist-ip 209.145.54.50
blacklist-ip 209.220.30.174
blacklist-ip 211.94.66.147
blacklist-ip 213.169.251.35
blacklist-ip 216.221.188.182
blacklist-ip 216.234.179.13
blacklist-ip 243.185.187.39
# List of IPs that will be accepted when nameserver is configured -whitelist-ip parameter
# whitelist-ip [ip/subnet]
# List of IPs that will be ignored
# ignore-ip [ip/subnet]
# speed check mode
# speed-check-mode [ping|tcp:port|none|,]
# example:
# speed-check-mode ping,tcp:80
# speed-check-mode tcp:443,ping
# speed-check-mode none
# force AAAA query return SOA
# force-AAAA-SOA [yes|no]
# Enable IPV4, IPV6 dual stack IP optimization selection strategy
# dualstack-ip-selection-threshold [num] (0~1000)
# dualstack-ip-selection [yes|no]
# dualstack-ip-selection yes
# edns client subnet
# edns-client-subnet [ip/subnet]
# edns-client-subnet 192.168.1.1/24
# edns-client-subnet [8::8]/56
# ttl for all resource record
# rr-ttl: ttl for all record
# rr-ttl-min: minimum ttl for resource record
# rr-ttl-max: maximum ttl for resource record
# example:
# rr-ttl 300
# rr-ttl-min 60
# rr-ttl-max 86400
rr-ttl-min 600
rr-ttl-max 3600
# set log level
# log-level: [level], level=fatal, error, warn, notice, info, debug
# log-file: file path of log file.
# log-size: size of each log file, support k,m,g
# log-num: number of logs
log-level warn
# log-file /var/log/smartdns.log
# log-size 128k
# log-num 2
# dns audit
# audit-enable [yes|no]: enable or disable audit.
# audit-enable yes
# audit-SOA [yes|no]: enable or disalbe log soa result.
# audit-size size of each audit file, support k,m,g
# audit-file /var/log/smartdns-audit.log
# audit-size 128k
# audit-num 2
# remote udp dns server list
# server [IP]:[PORT] [-blacklist-ip] [-whitelist-ip] [-check-edns] [-group [group] …] [-exclude-default-group]
# default port is 53
# -blacklist-ip: filter result with blacklist ip
# -whitelist-ip: filter result whth whitelist ip, result in whitelist-ip will be accepted.
# -check-edns: result must exist edns RR, or discard result.
# -group [group]: set server to group, use with nameserver /domain/group.
# -exclude-default-group: exclude this server from default group.
# server 8.8.8.8 -blacklist-ip -check-edns -group g1 -group g2
server 223.5.5.5:53 -blacklist-ip
server 119.29.29.29:53 -blacklist-ip
server 114.114.114.114:53 -blacklist-ip
server 1.1.1.1 -check-edns
server 1.0.0.1 -check-edns
server 8.8.8.8 -check-edns
server 8.8.4.4 -check-edns
server 208.67.222.222 -check-edns
# remote tcp dns server list
# server-tcp [IP]:[PORT] [-blacklist-ip] [-whitelist-ip] [-group [group] …] [-exclude-default-group]
# default port is 53
# server-tcp 8.8.8.8
server-tcp 8.8.4.4:53
server-tcp 208.67.222.222:443
# remote tls dns server list
# server-tls [IP]:[PORT] [-blacklist-ip] [-whitelist-ip] [-spki-pin [sha256-pin]] [-group [group] …] [-exclude-default-group]
# -spki-pin: TLS spki pin to verify.
# -tls-host-check: cert hostname to verify.
# -hostname: TLS sni hostname.
# Get SPKI with this command:
# echo | openssl s_client -connect ‘[ip]:853’ | openssl x509 -pubkey -noout | openssl pkey -pubin -outform der | openssl dgst -sha256 -binary | openssl enc -base64
# default port is 853
# server-tls 8.8.8.8
# server-tls 1.0.0.1
server-tls 8.8.8.8:853
server-tls 8.8.4.4:853
server-tls 1.1.1.1:853
server-tls 1.0.0.1:853
# remote https dns server list
# server-https https://[host]:[port]/path [-blacklist-ip] [-whitelist-ip] [-spki-pin [sha256-pin]] [-group [group] …] [-exclude-default-group]
# -spki-pin: TLS spki pin to verify.
# -tls-host-check: cert hostname to verify.
# -hostname: TLS sni hostname.
# -http-host: http host.
# default port is 443
# server-https https://cloudflare-dns.com/dns-query
server-https https://cloudflare-dns.com/dns-query
server-https https://dns.google/dns-query
# specific nameserver to domain
# nameserver /domain/[group|-]
# nameserver /www.example.com/office, Set the domain name to use the appropriate server group.
# nameserver /www.example.com/-, ignore this domain
# specific address to domain
# address /domain/[ip|-|-4|-6|#|#4|#6]
# address /www.example.com/1.2.3.4, return ip 1.2.3.4 to client
# address /www.example.com/-, ignore address, query from upstream, suffix 4, for ipv4, 6 for ipv6, none for all
# address /www.example.com/#, return SOA to client, suffix 4, for ipv4, 6 for ipv6, none for all
# enable ipset timeout by ttl feature
# ipset-timeout [yes]
# specific ipset to domain
# ipset /domain/[ipset|-]
# ipset /www.example.com/block, set ipset with ipset name of block
# ipset /www.example.com/-, ignore this domain
原文链接：https://www.codenong.com/cs107130250/
原创文章，作者：优速盾-小U，如若转载，请注明出处：https://www.cdnb.net/bbs/archives/23350
